- Neckloop
- Carry Case
- Audio Transceiver & Lapel Microphone
- Microphone Accessory
- 3.5mm Audio Cable
- USB-C Charging Cable
- Quick Start Guide
Access Bundle
Audeara needs your contact information to contact you about our products and services. You can unsubscribe from these communications at any time. For information on opting out, as well as our privacy practices and our commitment to protecting your data, please read our Privacy Policy.
Access Bundle
Easy Auracast™ access with your existing hearing device.
Already have a hearing aid or cochlear implant processor? The Audeara Access Bundle provides an easy way to access Auracast, without replacing your hearing device.
Audeara's Audio Transceiver is bundled with a neckloop, so you can listen to Auracast broadcasts through the hearing aid or cochlear implant processor you already own.
Your hearing device must have an enabled telecoil (T or MT) setting. Check compatibility before you buy.
Will it work with my hearing aid or implant processor?
Your device needs a telecoil setting that’s enabled and ready to use. It may be called T or MT. Not sure? Your hearing professional can confirm this before you order. Bluetooth® on its own isn’t enough.
Does my hearing device need Auracast?
No. Audio Transceiver receives the Auracast™ broadcast, and the neckloop passes the sound to your telecoil. You keep your existing hearing device; the bundle doesn’t add Auracast to the device itself.
Can I use it at any venue?
The venue needs to offer a suitable Auracast™ broadcast. Check with the organiser before you go. The bundle receives the audio; it doesn’t create the broadcast.
Do I need to pair it with my hearing device?
No Bluetooth pairing is needed between the neckloop and your hearing device. Select your device’s telecoil setting to receive the sound.
Neckloop (model NL2)
|
Connector: |
3.5 mm TRS, with tip and ring linked |
|
Impedance: |
12 Ω ±10% |
|
Input power: |
100 mW rated; 500 mW maximum |
Audio Transceiver & Lapel Microphone
| Bluetooth version | Bluetooth® 5.3 LE Audio BIS, CIS |
| Bluetooth protocol | A2DP / AVDTP / AVCTP / AVRCP / HFP |
| Support audio decoding formats | SBC / LC3 |
| Operation Mode | Pairing Mode (A2DP / CIS) Broadcast Mode (BIS) |
| Audio input (in TX mode) |
3.5mm line in, USB (only one single audio source can be used at a time) |
| Audio output (in RX mode) |
3.5mm line out |
| Latency | < 40ms |
| Battery capacity | 150 mAh |
| Charging time | 2 hours |
| DC input | 5V / 100mAh |
| Working time | 11 hours in TX mode 22 hours in RX mode (measured at 50% medium volume) |
| Working range | 50m (open space) |
| Weight | 10g |
| Dimensions | 26mm x 47mm x 10mm |
Features & Inclusions

A simple connection to the device you know
Connect the neckloop, select your telecoil setting and find the broadcast.
1. Receive the audio
Audio Transceiver picks up a suitable Auracast™ broadcast from the venue.
2. Connect the neckloop
Plug the neckloop into the receiver’s 3.5 mm audio socket.
3. Listen through your hearing device
Wear the neckloop and select your telecoil setting. The neckloop passes the sound to your hearing device using a magnetic signal.
Take your own listening setup to the event
At a conference, public talk or event offering a suitable Auracast™ broadcast, listen through your own hearing device rather than a separate headset. Check with the organiser before you go.

